Respirox JLO-590i Oxygen Concentrator with Nebulizer
Model JLO-590i
Operating Voltage 220-240V / AC
Frequency 50 Hz.
Oxygen Flow 1- 5 liters/minute
Oxygen Purity 1 -5 L 90 + 3% – 1-5 L 90 – 3%
Oxygen Monitor High Oxygen O2 > 90%+3
Low Oxygen O2 < 86%+3
Technical Service Requirement < 70%
Operating Temperature 5- 40 oC
Gross Weight 26 kg
Net Weight 24 kg
Type B
Class II
Sound Level : ≤55dB(A)
Time settings working mode
Efficient working system that provides high energy saving compared to conventional oxygen concentrators
Approved by the Ministry of Health CE and ISO Certified
Alarm; Power failure, high and low pressure, temperature (65°) low saturation.
| Basic Features | |
| Manufacturer | Respirox |
| Sound Level | ≤ 55 dB |
| SUT Code | DO1009 |
| Tür | Oxygen Concentrator |
| Warranty | 2 years |
| Capacity | 5 LPM |
| OPI | Low Oxygen (± 3%) |
| Continuous Flow | Yes |
| Continuous Flow Setting | 1-5 LPM |
| Weight | 24 kg |
Önemli Not
* Yapı Kredi Bankası için vade tutarları ortalama değerlerdir, ödeme adımında değişkenlik gösterebilir.
* Bazı vade tutarları ortalama değerlerdir, ödeme adımında ürünlerin KDV’lerinin farklılıklarından dolayı değişkenlik gösterebilir.
* Ödeme esnasında erteleme işlemi seçilen taksitlerde vade farkından dolayı tutar farklılıkları görülebilir.
This offer ends in:
In Cart
9,900.00 TL
17,289.00 TL
- Stock: In Stock
- Model JLO-590i
- Weight: 26.00kg
- Dimensions: 55.60cm x 28.50cm x 47.00cm
ÜCRETSİZ kargoyla YARIN KARGODA!Önemli İpuçları
Oxygen Safety Tips
- Do not use oxygen while smoking or near any open flame.
- Keep the concentrator away from heat sources such as fireplaces, candles, or any other open flame.
- Do not use petroleum-based lotions or creams with oxygen therapy.
- Always turn the oxygen concentrator off while not in use.
- Ensure there are working smoke detectors in your home.
- Regularly check power cords for any sign of wear that could cause a spark.
- It's important to make sure the cord is plugged into the machine FIRST, and then plug into the wall. If plugged into the wall first, before connecting the machine, that can create sparks which can be dangerous around oxygen.